低热固相法制备纳米MnO2/CNT超电容复合电极的循环稳定性

To improve the charge/discharge cycle stability of a nanostructured manganese dioxide electrode for supercapacitor applications, a series of nano-MnO2/carbon nanotube (CNT) hybrid electrode materials with different mass fractions of CNTs were prepared. The materials were prepared using a room-temperature solid-grinding reaction betweenMn(OAc)2·4H2Oand NH4HCO3 in the presence of CNTs to obtain a precursor. This was followed by calcination and an acid-treatment process and the products were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), and Brunauer-Emmett-Teller (BET) surface analysis. XRD results indicated that the MnO2 in the composites was nanostructured 酌-MnO2. Electrochemical performance of the MnO2/CNT composite electrodes in 1 mol·L-1 LiOH alkaline aqueous electrolyte was studied and compared to a pure nano-MnO2 electrode without CNTs. The MnO2/CNT composite electrodes with 10% or 20% (w, mass fraction) CNTs showed far superior cycle stability than the pure MnO2 electrode. The MnO2/CNT composite electrode with 10% CNTs exhibited good cycling stability and also a high specific capacitance of 200 F·g-1 at a high charge/discharge current rate of 1000 mA·g-1.     

硅酸镁在氢氧化钠亚熔盐体系中的溶解行为

采用液相法合成硅酸镁(MgSiO3),研究其在氢氧化钠高浓介质体系中的溶解行为,探讨了液固比、氢氧化钠初始浓度和反应温度对硅酸镁中氧化硅反应率的影响,用液-固多相收缩未反应核模型研究其在氢氧化钠高浓介质体系中的反应动力学.结果表明:硅酸镁在氢氧化钠高浓介质体系中溶解过程的控制步骤为界面化学反应控制,硅酸镁脱硅反应的表观活化能为31.664 kJ/mol,反应级数为1.98.此方法研究硅酸镁的溶解行为,为中低品位红土镍矿的合理利用提供理论依据.     

[Ni(H2O)4]3[U(OH,H2O)(UO2)8O12(OH)3], crystal structure and comparison with uranium minerals with U3O8-type sheets

The new U(VI) compound, [Ni(H₂O)₄]₃[U(OH,H₂O)(UO₂)₈O₁₂(OH)₃], was synthesized by mild hydrothermal reaction of uranyl and nickel nitrates. The crystal-structure was solved in the P-1 space group, a=8.627(2), b=10.566(2), c=12.091(4) Å and α=110.59(1), β=102.96(2), γ=105.50(1)°, R=0.0539 and wR=0.0464 from 3441 unique observed reflections and 151 parameters. The structure of the title compound is built from sheets of uranium polyhedra closely related to that in β-U₃O₈. Within the sheets [(UO₂)(OH)O₄] pentagonal bipyramids share equatorial edges to form chains, which are cross-linked by [(UO₂)O₄] and [UO₄(H₂O)(OH)] square bipyramids and through hydroxyl groups shared between [(UO₂)(OH)O₄] pentagonal bipyramids. The sheets are pillared by sharing the apical oxygen atoms of the [(UO₂)(OH)O₄] pentagonal bipyramids with the oxygen atoms of [NiO₂(H₂O)₄] octahedral units. That builds a three-dimensional framework with water molecules pointing towards the channels. On heating [Ni(H₂O)₄]₃[U(OH,H₂O)(UO₂)₈O₁₂(OH)₃] decomposes into NiU₃O₁₀.     

Theoretical evaluation of some interactions in the system of acetylene-alkali metal hydroxide-DMSO

Within the ab initio approach and with the use of density functional theory the formation of solvation shells of nondissociated alkali metals hydroxides of the corresponding cations and the hydroxide ion in dimethyl sulfoxide (DMSO) is studied. Complexes in which the alkali metal environment contains the coordinated acetylene molecule along with solvent molecules are considered. The coordination number of the hydroxide ion in DMSO is shown to be 4. It is demonstrated that solvated cations of alkali metals cannot form π-complexes with the acetylene molecule, whereas the introduction of molecular acetylene into the solvation sphere of nondissociated NaOH and KOH is possible.     

Microwave assisted extraction of iodine and bromine from edible seaweed for inductively coupled plasma-mass spectrometry determination

The feasibility of microwave energy to assist the solubilisation of edible seaweed samples by tetramethylammonium hydroxide (TMAH) has been investigated to extract iodine and bromine. Inductively coupled plasma-mass spectrometry (ICP-MS) has been used as a multi-element detector. Variables affecting the microwave assisted extraction/solubilisation (temperature, TMAH volume, ramp time and hold time) were firstly screened by applying a fractional factorial design (2^5-1 + 2), resolution V and 2 centre points. When extracting both halogens, results showed statistical significance (confidence interval of 95%) for TMAH volume and temperature, and also for the two order interaction between both variables. Therefore, these two variables were finally optimized by a 2² + star orthogonal central composite design with 5 centre points and 2 replicates, and optimum values of 200 °C and 10 mL for temperature and TMAH volume, respectively, were found. The extraction time (ramp and hold times) was found statistically non-significant, and values of 10 and 5 min were chosen for the ramp time and the hold time, respectively. This means a fast microwave heating cycle. Repeatability of the over-all procedure has been found to be 6% for both elements, while iodine and bromine concentrations of 24.6 and 19.9 ng g⁻¹, respectively, were established for the limit of detection. Accuracy of the method was assessed by analyzing the NIES-09 (Sargasso, Sargassum fulvellum) certified reference material (CRM) and the iodine and bromine concentrations found have been in good agreement with the indicative values for this CRM. Finally, the method was applied to several edible dried and canned seaweed samples.     

An impedance study of Ir(210) in HCl solutions

In the Ir(210)/aqueous HCl solution system the “hydrogen adsorption region” is due to the combined process of hydrogen and chloride ion adsorption. We demonstrate that by using impedance spectroscopy the rates of, and charges associated with, hydrogen and chloride adsorption rates can be determined separately. Published in Elektrokhimiya in Russian, 2009, Vol. 45, No. 1, pp. 32–41. Dedicated to the 100th anniversary of B.V. Ershler. The text was submitted by authors in English.     

Alkali-hydroxide-doped matrices for structural characterization of neutral underivatized oligosaccharides by MALDI time-of-flight mass spectrometry

We report new approaches using alkali-hydroxide-doped matrices to facilitate structural characterization of neutral underivatized oligosaccharides by matrix-assisted laser desorption/ionization (MALDI) time-of-flight (TOF) MS. The approaches involved pretreatment of the analytes with NaOH or LiOH in aqueous solution, followed by mixing them with MALDI matrices prior to MS analysis. It was found that for open-ended neutral underivatized oligosaccharides partial alkaline degradation occurred upon laser desorption and ionization of the hydroxide-pretreated analytes in 2,5-dihydroxybenzoic acid (DHBA). The effect intensified when nonacidic compounds such as 2,4,6-trihydroxyacetophenone (THAP) and 5-amino-2-mercapto-1,3,4-thiadiazole (AMT) were used as matrix. The degradation allowed facile identification of the reducing end residue of the analyte and facilitated its structural characterization by postsource decay TOF-MS. Applying the same technique using matrices composed of LiOH and THAP or AMT led to the production of singly as well as multiple lithiated ions of oligosaccharides containing hexoses with free 3-OH groups. Extensive lithiation through multiple hydrogen-lithium exchanges up to 6 Li atoms was observed for maltoheptaose, beta-cyclodextrin, and dextran 1500. Such a 'lithium tagging' technique makes it possible to differentiate positional isomers of milk-neutral oligosaccharides, lacto-N-difucohexaose I and II (LNDFH-I and LNDFH-II), without the need of chemical derivatization or tandem MS analysis.     

Immobilization of anionic iron(III) porphyrins into ordered macroporous layered double hydroxides and investigation of catalytic activity in oxidation reactions

The first generation anionic iron(III) porphyrin [Fe(TSPP)] and the second generation anionic complexes [Fe(TDFSPP)], [Fe(TCFSPP)], and [Fe(TDCSPP)] were immobilized into three-dimensionally macroporous layered double hydroxide (3DM-LDH), using the direct reconstruction of 3DM-LDH from macroporous mixed oxides MOX or the anionic exchange on DDS intercalated 3DM-LDH. The macroporous layered double hydroxides were obtained at the surface of nanometric polystyrene spheres, which were synthesized by an inverse opal method. Polystyrene was removed after calcination in oxidizing atmosphere, nanostructured mixed oxides (3DM-MOX) were obtained, which after reconstruction give origin to macroporous layered double hydroxide (3DM-LDH). Following metalloporphyrin immobilization, the resulting materials were characterized by powder X-ray diffraction (PXRD), scanning electron microscopy (SEM), UV–vis (glycerin mull) spectroscopy, attenuated total reflectance Fourier transform infrared spectroscopy (ATR/FTIR), and electron paramagnetic resonance (EPR). Results revealed that the complexes are either immobilized at the surface of the macroporous layered double hydroxide or intercalated between the layers, displacing some dodecylsufate anions. The obtained materials were investigated as catalysts for oxidation reactions, to find out whether they function as cytochrome P-450 models.     

Influences of evolved gases on the thermal decomposition of zinc carbonate hydroxide evaluated by controlled rate evolved gas analysis coupled With TG

The influences of atmospheric CO₂ and H₂O on the kinetics of the thermal decomposition of zinc carbonate hydroxide, Zn₅(CO₃)₂(OH)₆, were investigated by means of controlled rate evolved gas analysis (CREGA) coupled with TG. Although CO₂ and H₂O were evolved simultaneously in a single mass-loss step of the thermal decomposition, different effects of those evolved gases on the kinetic rate behavior were observed. No distinguished effect of atmospheric CO₂ was detected within the possible range of self-generated CO₂ concentration. On the other hand, apparent acceleration effect by the increase in the concentration of atmospheric H₂O was observed as the reduction of reaction temperature during the course of constant rate thermal decomposition. The catalytic effect was characterized by the decrease in the apparent activation energy for the established reaction with increasing the concentration of atmospheric H₂O, accompanied by the partially compensating decrease in the pre-exponential factor.